Arlon DPF White Ultra Tack Arlon’s DPF is a 90 micron, satin white, high-tensile, PVC film with aggressive, permanent adhesive. Designed to stick to . The ultimate premium film for hard to stick surfaces. A durable film combined with a high tack adhesive system allows you to use one film for all your difficult. “We use Arlon DPF every day because of its durability and price point. We wrap a lot of brick walls and needed something that would hold up in heavy.
|Published (Last):||9 August 2005|
|PDF File Size:||14.77 Mb|
|ePub File Size:||20.35 Mb|
|Price:||Free* [*Free Regsitration Required]|
DPF ™ Ultra Tack Technical Details | Arlon Graphics
The trade-off for high tack and adhesion is to expect higher visible shrinkage than normal. For this reason, an edge seal is recommended for applications that have very rough surfaces. Where it is practical, two people on the removal make the job go far faster than using just one.
PP, PEplastics exposed to gasoline from tanks will migrate through plastic and interfere with vinyl adhesion to the plastic. Standard warranty applies to vertical applications only.
Click here to see the WrapItRight video: For many polyolefinic surfaces, once the oily skin of the plastic is modified bond will improve dramatically. The film should be heated to a point of softening. When printing this product be vigilant about drying the finished decal completely before laminating, top coating or installing. Dust due to ablation cannot develop under the vinyl.
Plastic These surfaces benefit from slightly roughening with sandpaper before installation or surface oxidation with flame.
If the surface is not sealed there must be no loose paint, grit or chalk present. Due to the porosity of certain types of plastics i. Application in cold temperature environments. Aglon cannot wick to the adhesive surface from within the matrix of the wall. Printed durability is aflon on the ink system used. Because of the porous nature of all masonry and its general roughness, Arlon does expect water, snow or ice to seep between the film and wall and collect on the upper edges of the applied graphic.
This is contingent upon no rain or harsh outdoor weather conditions.
DPF ™ Ultra Tack | North America | Arlon Graphics
With one person working the heating unit in front of the second person who is peeling d;f, the job proceeds at a uniform and consistent pace.
Special Considerations Because of the porous nature of all masonry and its general roughness, Arlon does expect water, snow or ice to seep between the film and wall and collect on the upper edges of the applied graphic.
To assure highest adhesion the graphics will benefit from a final installation pass using a soft roller and heat source in combination. Addition of heat during removal will make the process much cleaner and faster.
DPF 8000™ Ultra Tack
Concrete, Masonry, and Tile The surface should be entirely dust free: These surfaces benefit from slightly roughening with sandpaper before installation or surface oxidation with flame. We do not recommend wrapping gasoline tanks or similar plastics exposed to dpv fumes.
Graphics Removal Remove the film in a continuous smooth motion at qrlon shallow angle for the fastest separation. As a result, it is best practice to not leave the printer unattended when printing to avoid headstrikes due to adhesive build up on the film edges over time.
The film installs best on flat surfaces when processed and applied according to Arlon recommendations. Non-vertical applications are not warranted for this product. The surface should be entirely dust free: Remove the film in a continuous smooth motion at a shallow angle for the fastest separation.
Removal steps are much easier as the adhesive 88000 remove more cleanly and if any adhesive remains, the surface will be cleaned of residue more easily. The surface must be sealed with a complete coat of paint aarlon concrete sealer and allowed to dry. Sealing porous surfaces creates three benefits: Where only one person is working there will be constant starting and stopping in addition to the problems of the heat being very inconsistent.
Rough surfaces may not carry the standard warranties.