Grandstream HandyTone is an “All-In-1” VoIP IAD based on SIPstandard. Built upon Grandstream’s innovative technology，HandyTone features superb. Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. It has one RJ11 FXS port(Telephone device), one RJ11 FXO port(Phone line). Grandstream Handytone Setup Guide. Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream.
|Published (Last):||14 March 2009|
|PDF File Size:||11.13 Mb|
|ePub File Size:||11.52 Mb|
|Price:||Free* [*Free Regsitration Required]|
The very first time to access the configuration page is always from LAN port. So we have to press: Upon rebooting, your phone should have connected to the VoIPtalk service. DO NOT include any leading zeros, so In order to prevent automatic posting on our website, we kindly request you to type in the number you see in the picture below.
How i fix this problems? Insert a standard RJ11 telephone cable into the LINE port and connect the other end of the telephone cable to a wall jack. This is not a mandatory step but we do recommend that you change the password. You should hear a confirmation message played back to you.
Dial 02 and you should hear the IP Address. Handytone users Handytone must be plugged into the LAN and connected to an analogue phone press the button on the Handytone, you should hear a menu prompt announcement on your analogue phone.
If you continue using the website without changing you cookie settings, you consent to the use of handytond cookies. Update the firmware of your Grandstream device to the recommended firmware version.
Grandstream Handytone Setup Guide
Configure your SIP Registration grandstreqm as shown below: Sending Fax from Zoiper to Zoiper using T. Insert the power adapter into the HandyTone and connect it to a wall outlet. On the first screenshot of ” Basic Settings look belowyou can change the End user password account: Type in the default password admin and press Login.
Select dynamically assigned via DHCP from grandsttream items below: Check these configuration instructions before continuing.
Introduction Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. If you are in static IP mode you can change the address. You will see the log in page of the device. The phone’s IP Address should appear on the phone’s screen. Please disconnect network cable and power cycle the unit before trying to reset the unit to factory defaults. To test this dial It also supports different codecs: You should see the following login screen: The configuration page should appear.
But how to enter the IP addresses? Set Admin Password to a personal value. It is a 12 digits HEX number located on the bottom side of the unit. Find the MAC Address of the device. To do this, just enter 12 digits for the new IP address.
Grandstream HandyTone 488 1FXS+1FXO Analog VoIP Router (Discontinued)
Let say, we want to enter for static IP address For example IP address: When booting the phone for the first time, please allow for minutes booting time as the phone might be automatically downloading handytpne installing a new version of the firmware. The device will reboot automatically and restore to factory default settings.
I do apartcipee the writing. Enter 9 to confirm the reset, or enter the MAC address to restore factory settings. This value will change the default admin that was used to access the phone menu in step 2 above.
Grandstream HandyTone 488
Type the web address into a web browser on a local PC. The instructions are listed above. Insert hanfytone Ethernet cable into the WAN port of HandyTone and connect the other end of the Ethernet cable to an uplink port a router or a modem, etc. Asterisk News Archives older news.