The Ltl Acorn M Series (Model LtlMC and LtlMM) is the second generation . on the camera (Part # LtlM), please follow the instructions below. A Wildlife Camera Trap. Camera Strap. USB Lead. TV Out Cable. Ltl Acorn Manufacturers Instruction Manual. Please note, the USB lead. LtlA Hunting Trail CameraLtlA Trail Camera NM – LTL ACORN LTLA 12MP Digital Hunting Trail Camera with NM No GlowHunting Trail.
|Published (Last):||27 July 2016|
|PDF File Size:||11.42 Mb|
|ePub File Size:||5.51 Mb|
|Price:||Free* [*Free Regsitration Required]|
The information contained in this post is applicable to the Ltl Acorn A wildlife camera model both nm and nm infrared array styles.
Please note, the USB lead will usually be found in the main compartment of the box along with the camera itself. The strap acorh TV Out Cable is found underneath the cardboard insert at one end acprn the box. For email product support please contact: Please note, your 1 year warranty is always with your retailer. Using batteries that are not powerful enough will often cause a problem with video recording at night time in dark or 521a light conditions.
So you may find that your camera works perfectly during the day but then only records 1 second videos at night time even if you have it set to record 10 or 20 second videos for instance. This is due to the extra power required to run the infrared array, so the camera triggers to record and starts the recording, it then realises it does not have enough power to run the infrared for any length of time and so shuts ltll back into standby mode.
This can happen over and over again whenever the camera is triggered, leaving you with lots of very short videos!
Always use genuine branded SD cards ,anual, there have been in the past many fake cards on the market especially being sold on Ebay etc. If you think your camera has developed a fault, try a system reset as below:. Infrared Cut Filter situated in front of the lens: When moving the camera in lttl hand you may notice the IR cut filter moving in front of the lens, this is perfectly normal.
When the camera is in operation, it will decide if the cut filter is needed automatically depending upon light levels. If you find that your camera is not responding correctly to the switch position you have selected, for instance the LCD screen does not come on in TEST mode but the camera works fine in ON mode, or if you have the camera in TEST mode but it si working as if in ON mode then it may be that the switch contacts have become dirty.
Cleaning Dirty Switch Contacts. This is something lgl is worth doing periodically to ensure the best performance and longevity of your Ltl Acorn camera. If your Ltl Acorn A camera has a serial number beginning withfor instancethen it will have the option of choosing from 9 different languages. aacorn
Manual de instrucciones LTL Acorn 5210 A Ir invisible
When you have the camera in TEST mode, push the left arrow key to run through the various language options. If your camera has this feature then you can adjust the power of the infrared, great if you are getting some white out issues on your night vision video footage or photos.
When in TEST mode just push the downward arrow button on the camera, your current infrared brightness level will be displayed on the screen, push the downward arrow key again to change the setting etc, there are 3 levels available high, medium and low and your camera is likely to be set to high msnual default.
Please let us know by emailing alan pakatak. To see the full range of cameras please click here. Cart Checkout My Account. Please read the section further down on this page for information on which batteries to use manuql your battery choice is vital to the performance of your camera.
Carefully remove back plate from camera body using the clips on each side and hand-tightening screw on the back. Flick the switch on the bottom of your camera to the TEST position. The LCD screen will come on it will go straight off again if you have not inserted a compatible SD card.
Remember to push the OK button after each setting change to save it. Remember to close the side clips and tighten the screw on the back of the camera by hand — this screw helps take some of the pressure off of the side clips. Press the OK button again to leave Playback acoorn.
Ltl Acorn A – information, set up guide & maintenance by Pakatak Ltd
If you think your camera has developed a fault, try a tll reset as below: Cleaning Dirty Switch Contacts This is something that is worth doing periodically to ensure the best performance and longevity of your Ltl Acorn camera. Language Set If your Ltl Acorn A camera has a serial number beginning withfor instancethen it will have the option of choosing from 9 different languages.
Infrared Brightness Adjustment applies to cameras out of the factory from around March onwards If your camera has this feature then you can adjust the power of the infrared, great if you are getting some white out issues on your night vision video footage or photos.